Skip to main content

When a QR code does not work

A printed QR code that opens nothing can often be fixed without a reprint. How to find the cause, and what to change.

Updated 12 Nov 2026

Open QR codesIn your workspace. You are asked to log in first if you are not already.

Two ways a code fails

A QR code is a printed address. When one "does not work", either the camera cannot read the print, or the camera reads it and the address behind it no longer leads anywhere useful. The first is a print problem. The second is a link problem, and when the code holds a short link you can fix it from your desk while the print stays where it is.

  1. Point a phone camera at the code.

    If no address appears on screen, the camera cannot read the print. Go to "The camera cannot read the code".

  2. If an address appears, open it.

    If you land on an error page or the wrong page, the print is fine and the link needs attention. Go to "The code scans but the page is wrong or missing".

What the print can and cannot change

The address inside a printed code is fixed in ink. What you can still change is where that address leads, and only if the address is a short link.

The code holdsWhen the page moves
A short link, such as a code downloaded from ShortZenThe code leads wherever the link's destination is set today. Edit the destination and the same print opens the new page.
The page address itself, as most free generators printThe code leads to that one page only. The print cannot be updated: redirect the old page on your own website, or reprint.

How to tell which you have

Scan the code and read the address the camera shows before you open it. If it is your short domain followed by a short name, it is a short link and the rest of this guide applies. If it is the long page address, the code was made without a short link.

The code scans but the page is wrong or missing

Open Links, find the link the code belongs to, and read its status. The status names the cause.

What the visitor meetsCause and fix
Your own website's "page not found"The link works, but the page it points at was moved or removed. The link's status may read Broken. Change the link's destination to a page that exists.
An old page: last season's menu, a finished offerThe destination was not updated when the content changed. Change the link's destination to the current page.
"This link has been paused"Someone switched the link off. Open the link and switch it back on.
"This link has expired", "This link has reached its click limit" or "This link isn't live yet"A date or a cap set on the link under More options has passed, or its go-live time has not arrived. Open the link and change or remove that setting. See Protecting and scheduling links.
An error page, and the link is missing from LinksThe link was deleted. Open Links, switch to Recently deleted under Views, and choose Restore. A deleted link can be restored for 30 days, unless another link answers on its address by then.
A browser error before any page loadsThe code uses your own domain, and the domain is not live or its DNS changed. Check the domain shows as Live on the Domains page. See Custom domains.

Nothing is reprinted

Each of these fixes is made on the link. The printed code holds the short address, which has not changed, so the next scan of the same print reaches the repaired link.

Point a printed code at a new page

Before you start

  • The printed code holds a ShortZen short link.
  • The address of the page visitors should reach now.

Steps

  1. Scan the printed code and note the short address the camera shows.

    This tells you which link to open. Search for it on the Links page.

  2. Open the link.

    Its record shows the current destination and status.

  3. Change the destination to the new page and save.

    The link's record shows the new destination.

  4. Scan the printed code again, in a private browser window if the old page still appears.

    The same print opens the new page.

What you should see

The print you already paid for sends people to the right page, and its scan history carries on unbroken.

How to check it worked

  • A scan of the printed code lands on the new page.
  • The link's status reads Live.

If something goes wrong

The scan still opens the old page.
Your browser cached the old page. Try a private window. If it is correct there, the link is fixed.
You cannot find the link in Links.
Check the workspace switcher at the top of the sidebar, then look in Recently deleted under Views.

The camera cannot read the code

When no address appears at all, the fault is in the print, and editing the link will not help. Check these in order. One of the first four fixes almost every failing code.

  1. Size. A code printed too small for the distance people stand at cannot be read. Print it larger.
  2. Contrast. Scanners need a dark code on a light background. A pale code, or a code on a mid-tone or patterned background, fails in poor light.
  3. Damage. A fold, a scuff, a glossy reflection or a soft print run hides part of the code. A higher error-correction level survives more of this.
  4. A mark in the middle. Anything placed over the centre of the code uses up the same headroom as damage does. Remove it if the code is small.
  5. Blur. A PNG enlarged for print develops soft edges. Send the printer the SVG, which stays sharp at any size.

These need a new print. Before it goes to press, print one test at the real final size and scan it with two different phones in ordinary light. QR codes has the full journey for producing a print-safe file.

Before the next print run

  • The code holds a short link, so the destination can change after printing.
  • The short link itself is final. The destination is safe to change later; the address inside the printed code is not.
  • The code was downloaded from ShortZen, so scans are counted apart from other clicks.
  • A test print at the final size scanned on two phones.
  • Someone owns the link after the campaign ends: pause it with a fallback URL rather than deleting it, so a late scan still reaches a useful page.

Can I change where a printed QR code goes?

Yes, when the code holds a short link. Edit the link's destination and the same print opens the new page. A code that holds the page address itself cannot be changed after printing.

Do QR codes stop working after a while?

The printed pattern does not wear out, and a ShortZen code has no end date of its own. It works for as long as its link does. A link stops when it is paused or deleted, or when a date or cap someone set on it passes.

The code used to work and now opens an error page. What changed?

Usually the link or the page behind it, not the print. Read the link's status in Links: it names what stopped it.

Still stuck? Contact us.

Try it on a real link

The free plan needs no card and has no time limit.